'} {dede:field.title/}
  • {dede:field.title/}
  • {dede:field.title/}
  • {dede:field.title/}
  • {dede:field.title/}
prevnext

EPR60 Stepper Driver

  •   EPR60 stepper motor driver is based on Ethernet technology which developed by Rtelligent. The driver adopt MODBUS/TCP protocol With standard ethernet interface 10M/100M bps internet interface can be compatible. Compare with MODBUS/RTU productsthe communication speed is greatly improved (highest speed of NT60 is 115200bps). With the standard Ethernet format compatible function much cost can be saved.
          
    Configurator Interface: USB port.
          
    Maximum Current: 6A.
          
    Power Voltage: 24-50V DC 36V or 48V recommended.
          
    Typical Application: Production line Li-on battery equipment Solar energy equipment 3C 
    electrical equipment.


     

  • tel:0755-29503086
  • Product Details

Description of driver functions



Functions
 
Description of operations
 
USB communication port Used to connect PC configuration to set the parameter.
Indicator

 

The drive has two indicators: the green one, a power indicator and twinkle upon the power up of drive; the red one, a fault indicator and twinkle in case of overvoltage and overcurrent. The red indicator goes off only when the fault is removed. The fault of drive can only be removed when the drive is powered on and enabled again.

Ethernet interface

 

Standard Ethernet interface.

SL S2 potentiometer

 

Used to set IP address. 2 potentiometer can set total 255 addresses.

Input & output

 

EPR60 has 6 digital input ports and 2 digital output ports. There are 2 input ports can receive 5V-24V level differential signal. And 2 optocoupler. Isolation output. The highest withstand voltage is 30V, the highest sink current and source current is 100mA.

Power and Motor interface

V-, V+ connect the drive to the DC power supply. Recommendation voltage is 24-50VDC. Power is over 150W. A+. A-, B+ and B- are used to connect with the A,B phase winding of 2-phase motor.



Installation dimensions of EPR60 Stepper Driver

Installation dimensions of EPR60 Stepper Driver

Installation dimensions of EPR60 Stepper Driver

 


Slave address setting

Slave address setting

Slave address setting

 


The pin distribution of CN 

The pin distribution of CN

The pin distribution of CN 


 

 

 LED indication of  EPR60 Stepper Driver

 LED indication of  EPR60 Stepper Driver

 LED indication of  EPR60 Stepper Driver

 

advisory:EPR60 Stepper Driver